Non Vacuum Tubes (Nasmed)

Specimen: Serum
Additive: Clot Activator/Silica
Cap color: Red
Tube size: 13 x 75mm
Draw volume: 2.0ml, 3.0ml, 4.0ml
Inversion: Invert the tube 6-8 times gently
Recommended centrifuge: 30minute after collection Centrifuge for 10 minute at 3500-4000 RPM

Intended use
Clot Activator Tubes are used to collect, transport and process blood for testing serum in the clinical laboratory.
Principle
Clot Activator Tubes is coated with micronised silica particles which cause blood to clot rapidly. It can provide enough nonpolluted serum specimen for clinical test.
Design
It is composed of plastic and or glass tube containing Separating gel and spray-dried microscopic silica particles.

Intended use
Gel + Clot Activator Tubes are used to collect, transport and process blood for testing serum in the clinical laboratory.
Principle
Clot Activator Tube is coated with micronised silica particles which cause blood to clot rapidly and the barrier gel can effectively separate the serum from fibrin and cells, while preventing substance exchange between blood cell and serum.
Design
It is composed of plastic and or glass tube containing Separating gel and spray-dried microscopic silica particles

Intended use
K2 EDTA tubes are used to collect, transport and process blood for testing plasma or whole blood in the clinical laboratory.
Principle
EDTA can effectively chelat the calcium ion of blood, therefore it can prevent the blood coagulation, does not affect the count and size of the leukocyte and keep erythrocyte invariable.
Design
It is composed of plastic and or glass tube containing K2 EDTA potassium salt as anticoagulant.

Specimen: Whole blood
Additive: 1.8mg/ml
Cap color: Lavender
Tube size: 13 x 75mm
Draw volume: 2.0mI, 3.0ml, 4.0ml, 5.0ml, 6.0ml, 7.0ml, 8.0ml, 9.0ml, 10.0ml
Inversion: Invert the tube 5-8 times gently
Recommended centrifuge: Centrifuge for 10 minutes at 3500-40O0RPM

Intended use
K3 EDTA tubes are used to collect, transport and process blood for testing plasma or whole blood in the clinical laboratory.
Principle
EDTA can effectively chelat the calcium ion of blood, therefore it can prevent the blood coagulation, does not affect the count and size of the leukocyte and keep erythrocyte invariable.
Design
It is composed of plastic and or glass tube containing K3 EDTA potassium salt as anticoagulant.

Intended use
Sodium Citrate 3.2 % tubes are used to collect, transport and process blood for testing plasma or whole blood in the clinical laboratory.

Principle
Coagulation tubes are filled with buffered tri — sodium citrate. The mixing ratio is 1 part citrate to 9 parts blood with advantages of high accurate blood — to — additive ratio. It can provide an excellent condition for the blood coagulation studies.
Design
It is composed of plastic tube containing Sodium Citrate as anticoagulant.

Intended use
Sodium Citrate 3.8 % tubes are used to collect, transport and process blood for testing plasma or whole blood in the clinical laboratory. Principle
Coagulation tubes are filled with buffered tri — sodium citrate. The mixing ratio is 1part citrate to 9 parts blood with advantages of high accurate blood — to — additive ratio. It can provide an excellent condition for the blood coagulation studies.
Design
It is composed of plastic tube containing Sodium Citrate 3.8% as anticoagulant.

Specimen: Plasma
Additive: 15unit/ml ±10%
Cap color: Green
Tube size: 13 x 75mm
Draw volume: 2.0mI, 3.0ml, 4.0ml
Inversion: Invert the tube 6-8 times gently
Recommended centrifuge: Centrifuge for 10 minutes at 3500-40O0RPM

Intended use
Lithium Heparin tubes are used to collect, transport and process blood for testing plasma or whole blood in the clinical laboratory.
Principle
The anticoagulant heparin activities antithrombins, thus blocking the coagulation cascade and produce plasma.
Design
It is composed of plastic tube containing Lithium Heparin as anticoagulant.

Specimen: Plasma
Additive: Sodium Fluoride 2mg/ml K2 EDTA- 1.8mg/ml
Cap color: Gray
Tube size: 13 x 40mm
Draw volume: 0.5ml, 1.0ml
Inversion: Invert the tube 6-8 times gently
Recommended centrifuge: Centrifuge for 10 minute at 3500-4000RPM

Intended use
Sodium Fluoride tubes are used to collect, transport and process blood for testing plasma or whole blood in the clinical laboratory.
Principle
The additive EDTA potassium salt which can chelate the calcium ion of blood prevents the blood coagulation. Sodium fluoride controls the glycolysis.
Design
It is composed of plastic and or glass tube containing Sodium fluoride and EDTA potassium salt as anticoagulant.

Specimen: Plasma
Additive: 15unit/ml ±10%
Cap color: Green
Tube size: 13 x 75mm, 13 x 10Omm, 16 x 1OOmm
Draw volume: 2.0ml, 3.0ml, 4.0ml, 5.0ml, 6.0ml, 7.0ml, 8.0ml, 9.0ml, 10.0ml
Inversion: Invert the tube 6-8 times gently
Recommended centrifuge: Centrifuge for 10 minute at 3500-4000RPM

Intended use
Sodium Heparin tubesre used to collect, transport and process blood for testing plasma or whole blood in the clinical laboratory. Principle The anticoagulant heparin activities antithrombins, thus blocking the coagulation cascade and produce plasma. Design It is composed of plastic tube containing Sodium Heparin as anticoagulant.

Clot Activator– Blood Collection Tube

Gel + Clot Activator – Blood Collection Tube

K2 EDTA – Blood Collection Tube

K3 EDTA – Blood Collection Tube

Sodium Citrate 3.2 – Blood Collection Tube

Sodium Citrate 3.8 – Blood Collection Tube

Lithium Heparin – Blood Collection Tube

Sodium Fluoride – Blood Collection Tube

Sodium Heparin – Blood Collection Tube

For Latest Updates Of Our Product Range

Our Products

Quick Links

Opening Hour